The Fila WET 1L Consolidating Protective with a wet effect.
RAW MARBLE AND GRANITE, ROUGH STONE AND AGGLOMERATES, TUFF
WHAT IT IS USED FOR
- It gives a pleasant wet effect to surfaces with a rough finish (tumbled, flamed, split).
- Protects the material from water and oil.
- Treatment with a consolidating effect.
THE ADVANTAGES
- It gives a wet effect that can be graduated with the number of coats applied.
- Does not yellow under any environmental or aging conditions.
- Does not peel.
HOW TO USE
-
No dilution: ready for use.
- With the surface dry and clean, apply a coat of WET evenly and continuously with a brush.
- After 24 hours repeat the operation in the same way.
- For very absorbent materials, a third coat may be necessary to achieve the desired wet effect.
-
Maintenance: diluted solutions of CLEANER PRO.
In areas most exposed to atmospheric agents it is recommended to reapply the product every two years.
ATTENTION
Do not apply the product outdoors if rain is forecast within 24 hours.
Do not walk on the floor while it is drying: wait 24 hours after
applying the last coat.
Do not apply on terracotta floors or shiny surfaces.
In case of bad application and when a complete thorough cleaning is necessary, remove WET using NOPAINT STAR.
The product cannot be applied on supports with problems related to rising humidity and in humid environments where there is water stagnation (showers, sauna, Turkish bath...).
INDICATIVE YIELD
With one liter of product I do: